SilverCrest STK 870 B2 Instructions D'utilisation Et Consignes De Sécurité page 8

Protect the power cord against
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
away from hot surfaces and open
flames .
Operation
The product must not be left
unattended while it is connected to
the supply mains .
Do not move the product while it is
in operation .
Do not place the product on hot
plates (gas, electric, coal cooking
range etc .) . Operate the product
on a level, stable, clean, heat-
resistant and dry surface .
Do not cover the product while it is
in use or shortly after use, when it
is still hot .
The use of extension cords is not
recommended . If the use of an
extension cord is necessary, it must
be designed for a current flow of
at least 10 A .
Lay cords in such a way that
they may not be tripped over or
otherwise damaged .
The product is not intended to be
operated by means of an external
timer or separate remote control
system .
Cleaning and storage
m WARNING! Risk of injury!
Disconnect the product from the
power supply before cleaning
work and when not in use .
Do not store the hot product in a
cupboard or in the packaging .
Do not pull the power plug out of
the electrical outlet by the power
cord .
Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping and
splashing water .
Store the product in a cool, dry
place, protected from moisture
and out of the reach of children .
Protect the product against heat .
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances .
˜ Before first use
1 . Remove the packaging material .
2 . Clean the product (see "Cleaning and care") .
NOTES:
The first few times the product is heated up, a faint
o
odour may be present . Ensure sufficient ventilation
in the area .
Discard the first set of toasted bread slices .
o
Set the browning level to at least level 4 for the
o
first use .
˜ Operation
1 . Unwind the power cord
rewind before use .
[ 9 ]
2 . Connect the power plug
outlet .
from the cord
7 ] [
to a suitable socket-
7 ] [
GB/IE/NI 9