Gaggenau 400 Serie Instructions D'installation page 8

en-us Installation Procedure
Remove the hose clip from the back of the dishwasher.
3.
4.
WARNING Pinch Point Hazard
Keep fingers out of openings on the inner door.
▶
Sliding parts can pinch fingers.
Add the 9 pieces of hook and loop fasteners to the outer
door.
9 x
Remove the side deco strips and reserve the strips and
5.
screws for later.
8
4 Installation Procedure Installation Procedure
Follow these instructions to install the dishwasher.
Installation Procedure
4.1 Pre-level the Dishwasher
Set the dishwasher to the correct height before it goes into
the cabinet.
Measure the height of the cabinet opening.
1.
Raise the front of the dishwasher to approximately 1/2"
2.
lower than the height of the opening by turning the feet
clockwise.
You can raise the rear foot after the unit is in the cabinet
opening.
Use a level on the top front to see that both feet are
3.
even.