Gaggenau 400 Serie Instructions D'installation page 7

2.6 Cabinet Requirements
Ensure that the cabinet space for the installation meets
the required dimensions.
If the dishwasher is to be installed in a corner, ensure that
there is adequate clearance to open the door as shown.
3 Installation Preparation Installation Preparation
After locating the proper place for your dishwasher, create
Installation Preparation
an opening to allow for water, drain and electrical lines on
the appropriate side.
Cut a rectangular hole 2.5" x 3.5" in the rear corner on
1.
the sink facing side.
If the opening is made through wood, sand it smooth.
If the opening is made through metal, use the Edge
Protector with Power Cord clips Kit SMZEPCC1UC.
Remove the rubber apron from the top of the
2.
dishwasher.
Installation Preparation en-us
or
7