Gaggenau 400 Serie Instructions D'installation page 11

Move the template 9.4" (240 mm) from line A.
7.
Draw another line and mark the dots at II.
‒
Make pilot holes with a hammer and a center punch.
8.
4.6 Attach Panel Mounting Brackets
Drill 2/3 of the way through the panel.
1.
Attach the mounting brackets to the panel with the
2.
screws provided.
Attach by hand; do NOT use a power drill.
‒
4.7 Attach the Panel and Deco Strips
If your dishwasher requires a handle, attach it before
1.
mounting the panel to the dishwasher.
Attach the panel to the dishwasher by aligning the
2.
brackets into the hinges and sliding into place.
Installation Procedure en-us
11