Publicité
Les langues disponibles
Les langues disponibles
3.4 Electric Start Battery Connection
Batteries product explosive gases. Keep sparks, flames and cigarettes
away from the battery at all times. To prevent the possiblity of creating a
spark while using the battery, connect chargingi cables to battery terminals
first, then to the generator. When disconnecting, disconnect the cables at
the generator first.
1. Connect the red cable with the positive terminal of the battery. Ensure the connection
is secured by using the fastener at the battery terminal.
2. Connect the black cabel with the negative terminal of the battery. ensure the
connection is secured by using the fastener at the battery terminal
Be sure to connect the Electric Start Battery to the EZG7250 Generator set
before operation. failure to do so wil cause the Output Display to function
improperly.
Do not reverse the polarity of the terminals when charging the battery.
Serious damage to the generator and/or battery may occur. Do not attempt
to connect the battery while the generator engine is running. Disconnect
the cables from the battery while the generator is in storage.
20
Publicité
