Tronic TPA 35 A1 Instructions D'utilisation Et Consignes De Sécurité page 36

˜ Before use
Remove all packaging materials (including foils).
Verify the package contents are complete and
undamaged!
˜ Start-up
ATTENTION! RISK OF PROPERTY DAMAGE The
m
total power consumption of the connected devices must not
exceed 35 W (USB Type-A 15 W
20 W
[ 2 ]
Plug the product into a correctly installed socket.
Connect the appliance that should be charged with the
product by plugging its USB-plug into the output USB port
(Type A) or output USB port
1 ] [
Disconnect the charged appliance from the product after
charging, by unplugging the USB-plug from the USB-
socket.
˜ Troubleshooting
What should I do if external devices cannot get
power from the product?
Check the USB cable (not included) connection between
the external devices and the product.
Make sure the external device's charging socket is working
properly.
34 GB/IE
).
and USB Type-C
1 ] [
(Type C).
2 ] [