Create Wind Large Manuel D'instructions page 12

W IRING CON N ECTI ON
Make the connection between the receiver wires and the fan motor wires following the color
indications. Make sure the connection is tight.
Take ground
L
N
RE MO TE CON TROL CO NNECT IO N
• Make the connection between the receiver cables and the fan motor cables following the color
indications. Make sure the connection is tight.
CA NOPY AS SE MB LY
• Raise the canopy to hanging bracket, aligning loosened screws in hanging bracket with slotted
holes in the canopy.
• Twist the canopy to lock. Re-insert the screws and secure all the screws with a screwdriver.
• With hanging bracket secured to the outlet box and able to support the fan, you are now ready
to hang your fan.
• Grab the fan firmly with two hands. Slide downrod through the opening in the hanging bracket
and let the hanging ball rest on the hanging bracket.
• Turn the hanging ball slot until it lines up with the hanging bracket tab.
Tip: Seek the help of another person to hold the stepladder in place and to lift the fan up to you
once you are set on the ladder.
E NGL I SH
12
Ground (green/yellow)
L input
(black)
Remote
control
receiver
Input N
(white)
DC L motor (gray)
DC L motor (pink)
DC L motor (red)