SilverCrest 353496 2007 Mode D'emploi Et Consignes De Sécurité page 34

Press the TUNE+
♦
ENTER / SCAN dial
Press the VOLUME |
♦
The display
NOTE
► In standby mode, the time and date are shown on the display
Automatic update
The Auto update function allows you to set whether the date and time are set
automatically via the radio stations' RDS (Radio Data System) signal or manually.
NOTE
► If Update all is set, the date and time are set automatically via the RDS
signal from the radio stations.
► If Update from DAB and Update from FM are set, the date and time are
set automatically via the RDS signal of the DAB+ or FM radio stations.
► If No update is set, the date and time are not set automatically, but must
be set manually.
► The default setting for the Automatic Update function is From radio.
While in the System menu, press the TUNE+
♦
times if necessary) or turn the VOLUME |
SCAN dial
Press the VOLUME |
♦
Press the TUNE+
♦
VOLUME |
on the display
Press the VOLUME |
♦
Press the TUNE+
♦
ENTER / SCAN dial
DAB, Update from FM or No update.
Press the VOLUME |
♦
SRH 5 C3
8 7
or TUNE−
6
to set the year.
ENTER / SCAN dial
1
shows the message Time saved.
6
until Time appears on the display
ENTER / SCAN dial
8 7
or TUNE−
ENTER / SCAN dial
1
.
ENTER / SCAN dial
8 7
or TUNE−
6
to choose between Update all, Update from
ENTER / SCAN dial
button or turn the VOLUME |
6
to confirm the entry.
8
or TUNE−
ENTER /
1
.
6
to confirm the selection.
button several times or turn the
6
until Auto Update appears
6
to confirm the selection.
button or turn the VOLUME |
6
to confirm the selection.
1
.
7
button (several
GB │ IE 31 ■
│