Publicité
Les langues disponibles
Les langues disponibles
♦
When the nap time has elapsed, an increasingly loud alarm sounds.
NAP flashes on the display
Deactivating the nap timer
♦
When the alarm goes off, press any button to end the timer.
NOTE
►
To turn off the timer before the end of the alarm time, call up the NAP func-
tion as described in the section Setting the nap timer. Set the alarm time
to 000 and press the VOLUME |
the selection. The nap timer is now deactivated.
Automatic switch-off (Sleep function)
You can use the sleep function to automatically switch the device off after
10–120 minutes.
During ongoing operation, go to the System menu and press the TUNE+
♦
or TUNE−
Press the VOLUME |
♦
Press the TUNE+
♦
VOLUME |
(Off, 10, 15, 30, 45, 60, 90, 120 minutes).
Press the VOLUME |
♦
After exiting the system menu, S appears on the right of the display
followed by the remaining minutes or seconds.
♦
After the set time, the device will switch itself off automatically.
♦
To disable the Sleep function, select the setting Off as described above and
press the VOLUME |
■
26
GB │ IE
│
1
7
button (several times if necessary) or turn the VOLUME |
6
ENTER / SCAN dial
ENTER / SCAN dial
8
or TUNE−
ENTER / SCAN dial
ENTER / SCAN dial
ENTER / SCAN dial
and the set alarm time is displayed.
ENTER / SCAN dial
until Sleep appears on the display
6
to confirm the selection.
7
button several times or turn the
6
to select the switch-off time
6
to confirm the selection.
6
to confirm the selection.
6
to confirm
8
1
.
1
SRH 5 C3
Publicité
