Publicité
8.2.2.18
H-ondes
Type
Intensity - CC mode
Intensity - CV mode
Pulse
Frequency
Modulation
Channel mode
8.2.2.19
Diadynamiques
Type
Intensity - CC mode
Intensity - CV mode
Base (direct component)
Basic frequency
Pulse interruption
DF
MF
CP
LP
RS
CP-
ISO
CP-ISO type parameters*: alternation of DF and MF with the amplitude 80 % of DF;
JFB MEDICAL 46 route des bancs de pierre 69690 Bessenay
T 04 74 70 89 08
BTL-4000 SMART/PREMIUM – MODE D'EMPLOI I PAGE 44 DE 57
symmetric
0 to 140 mA
0 to 100 V
2 x 5.6 ms
0.1 to 87.7 Hz
See Current Modulation below in this chapter.
See Channel Mode below in this section.
DF, MF, CP, LP, RS, CP-ISO, LP-ISO, MM
0 to 70 mA
0 to 100 V
0 / 0,5 / 1 / 2 / 5 / 10 / 20 / 30 / 40 / 50%
50 or 60 Hz
8,000 Hz
DF type parameters*: continuous sinusoidal pulses, frequency 100 Hz
MF type parameters *: continuous sinusoidal pulses, frequency 50 Hz
MM type parameters*: amplitude-modulated MF, continuous sinusoidal pulses, 50 Hz
CP type parameters *: alternation of DF and MF; 1 second DF, 1 second MF
LP type parameters *: alternation of DF with modulation and MF; 10 seconds DF with
modulation, 4 seconds MF
RS type parameters*: alternation of MF and pause; 1 second MF, 1 second pause
1 second DF, 1 second MF
Email jfb@jfb.fr
Site www.jfb.fr
Publicité
