Publicité
Les langues disponibles
Les langues disponibles
Improving the connection between wall and suction cups: Clean the
surface on which you intend to attach the product. Before attaching the product,
moisten the suction cups
Removing the product: Insert a fingernail, or a similar object, under the rim
of each suction cup
˜ Operation
˜ Receiving the DCF radio signal
(Fig. B)
Insert a 1.5 V AA/LR6 battery with the correct polarity into the battery
compartment
[
7 ]
The product automatically starts to search for the radio signal. This process takes
about 3 to 12 minutes to complete.
Note: Within 4 minutes, the hands will move to 12 o'clock. The reception of the
radio signal is initiated once all the hands have moved to the 12 o'clock position.
After 3 to 10 minutes, the product will receive the signal and set itself to the exact
time.
Starting reception of the radio signal manually: Press and hold the REC button
at least 5 seconds. The product attempts to receive the radio signal. This process
takes a few minutes to complete.
Notes:
Press the REC button
If the product was not able to receive the radio signal because of errors, e.g.
due your location to being at too great a distance from the time signal transmitter
or for other reasons, you can set the time manually. The manually set value is
overwritten as soon as reception of the radio signal is successful.
For products intended for Latvia, Romania, Cyprus, Bulgaria, Finland and Greece
the display stops at "01:00".
28 GB/IE
.
2 ]
[
to release them.
2 ]
[
on the back of the product.
with a pointed object (e.g. pencil).
5 ]
[
5 ]
[
Publicité
