Publicité
Les langues disponibles
Les langues disponibles
˜ Setting the time manually
(Fig. B)
Press and hold the SET button
manual mode.
Press and hold the SET button
for you to set the time.
Briefly pressing the SET button
enable you to set the current time manually.
Notes:
Press the SET button
After 8 seconds without pressing the SET button
manual mode and keeps the time as normal. The manually set value is overwritten
as soon as the reception of the radio signal is successful.
˜ Reverting to factory setting
(Fig. B)
Press the RESET button
battery from the product and insert it again. The product automatically starts to
search for the radio signal.
Note: Press the RESET button
˜ Cleaning and care
The product should only be cleaned on the outside with a soft dry cloth.
If the product is not going to be used, remove the battery.
Note: When the battery voltage is depleted after about 9 months (depending on
reception quality), the second hand will stop moving. However, the hour and minute
will keep on showing the right time until the battery voltage is too low, after which the
product will stop completely.
It is advised to change a new battery as soon as the second hand stops.
at least 3 seconds. The product switches into
[
6 ]
again until the hands reach the correct position
[
6 ]
moves the hands forward in one minute steps to
6 ]
[
with a pointed object (e.g. pencil).
[
6 ]
to revert to factory settings. Alternatively, remove the
[
4 ]
with a pointed object (e.g. pencil).
[
4 ]
, the product switches out of
6 ]
[
GB/IE
29
Publicité
