Motorola K701 Mode D'emploi page 20

3.9.4 Deleting an entry in a speed dial location
1. Follow steps 1 to 4 in the section 3.9.1.
2. Press SELECT and then VOL+ or REDIAL/VOL- to select DELETE.
3. Press SELECT. The screen will display "DELETED" with a confirmation tone.
3.10 Memory
You can store up to 3 numbers in the memory locations (M1, M2, M3). Each memory location
can have a maximum of 24 digits for the number and 15 characters for the name. This
feature makes it convenient when you want to dial a certain number more quickly. All direct
access memory records will remain after resetting.
3.10.1 Storing a memory number
1. In idle mode, use the dialing keys (0-9) to enter the number you want to store in the
memory location.
2. Press and hold the desired memory location that does not store any number. The
screen will display "ENTER NUMBER" and will show the number.
3. Press SELECT to save.
NOTES
• Press CLEAR to delete a digit.
• Press VOL+ or REDIAL/VOL- to move the cursor to the left or right.
NOTE
If the number you entered exceeds 24, you will hear an error tone.
3.10.2 Reviewing a memory number
1. Press and hold the desired memory location, and the screen will display the number
stored in there.
NOTE
If no number is stored in the location, the display will show "ENTER NUMBER".
3.10.3 Dialing from the memory
In idle mode:
1. Press the desired memory location key to dial the number stored in that memory
location automatically.
OR
1. Press /FLASH or
2. Press the desired memory location key to dial the number stored there automatically.
3.10.4 Editing a memory number
1. Press and hold the desired memory location, and the screen will display the number
stored in there.
20
All manuals and user guides at all-guides.com
/SPEAKER.
Using the phone