Bosch GIC 12V-5-27 C Professional Notice Originale page 35

Bend the camera cable (1) so that the camera head can be easily introduced into the en-
vironment to be inspected. Carefully introduce the camera cable.
Adjust the brightness of the camera illumination light (3) so that the image is easily re-
cognisable. When photographing highly reflective objects, for example, you can achieve
better results in lower light or using black and white contrast setting.
If objects to be inspected look blurred, then reduce or increase the distance between
camera head (2) and object.
Errors – causes and corrective measures
Error indicator Cause
in the display
Internal memory al-
most full
(yellow warning)
Internal memory full Delete the files from the internal memory or in-
Error in the internal
memory
(red warning)
Micro-SD card al-
most full
SD
SD
(yellow warning)
Micro-SD card full
Error in the micro-
SD
SD
SD card
(red warning)
Maintenance and Service
Maintenance and Cleaning
Do not immerse the handheld device (13) in water or other liquids.
Bosch Power Tools
Corrective measures
Delete the files from the internal memory or in-
sert a micro-SD card (20).
sert a micro-SD card (20).
Restart the inspection camera.
If the problem persists, contact an authorised
Bosch after-sales service centre.
Delete the files from the micro-SD card (20).
Delete the files from the micro-SD card (20).
Remove the micro-SD card (20) and insert it
again.
Check the micro-SD card in a different device.
1 609 92A 9RJ | (24.05.2024)
English | 35