Bosch GIC 12V-5-27 C Professional Notice Originale page 34

34 | English
– Transferring photo files from the internal storage via USB Type‑C®: Transfer is only
possible if there is no micro-SD card (20) inserted in the inspection camera.
– Transferring files from the micro-SD card (20): You can transfer files from the inser-
ted micro-SD card (20) either via USB Type‑C® or by removing the micro-SD
card (20) and inserting it into another device.
Inserting the micro-SD card
Open the top flap (16) and push the micro-SD card (20) all the way into the slot (18),
paying attention to the correct orientation. Carefully close the top flap again.
Data transfer via the USB Type-C® interface
Switch on the inspection camera to transfer data via the USB Type-C® interface. Open
the flap for the USB Type-C® port (17). Connect the USB Type-C® port to your PC via the
USB Type-C® cable (19).
Open the file browser on your PC and select the drive for transferring the files. The name
of the drive is as follows:
– If no micro-SD card is inserted into the inspection camera: Bosch_GIC
– If an unnamed micro-SD card is inserted into the inspection camera: Standard name
of the USB drive
– If a named micro-SD card is inserted into the inspection camera: Name of the micro-
SD card
The saved files can be copied from the internal memory or the micro-SD card of the in-
spection camera, moved to your PC or deleted.
As soon as you have completed the required operation, disconnect the drive following
the standard procedure.
Note: Always disconnect the drive from the operating system of the PC first (eject drive),
as failure to do so may damage the internal memory of the inspection camera.
Remove the USB Type-C® cable (the inspection camera will switch off automatically).
Close the upper flap (16) to protect against dust or splashes.
Note: Only use the USB Type-C® interface to connect the inspection camera to a PC. The
inspection camera may be damaged if connected to other devices.
Note: The USB Type-C® interface can only be used for data transfer. Rechargeable bat-
teries or other devices cannot be charged by this interface.
Working Advice
Check the environment that you want to inspect, paying particular attention to obstacles
or hazardous areas.
1 609 92A 9RJ | (24.05.2024) Bosch Power Tools