Flex LB 125 18.0-EC Notice D'instruction D'origine page 29

LBE 125 18.0-EC/LB 125 18.0-EC/L 125 18.0-EC-LD
Declaration of Conformity
We as the manufacturer: FLEX
Elektrowerkzeuge GmbH,
Business address: Bahnhofstr. 15,
71711 Steinheim, Germany
declare under our sole responsibility, that
the product(s) described under „Technical
specifications" fulfills all the relevant provi-
sions of The Supply of Machinery (Safety)
Regulations S.I. 2008/1597 and also fulfills
all the relevant provisions of the following
UK Regulations:
Electromagnetic Compatibility Regulations
S.I. 2016/1091, The Restriction of the Use
of Certain Hazardous Substances in Electri-
cal and Electronic Equipment Regulations
S.I. 2012/3032 and are manufactured in
accordance with the following designated
Standards: BS EN 60745-1:2010,
BS EN 60745-2-3:2011, BS EN 55014-1:2017,
BS EN 55014-2:2015
Place of declaration: Steinheim, Germany.
Responsible person: Peter Lameli,
Technical Director – FLEX-Elektrowerk-
zeuge GmbH
Contact details for Great Britain:
FLEX Power Tools Limited,
Unit 8 Anglo Office Park, Lincoln Road,
HP 12, 3RH Buckinghamshire,
United Kingdom
Peter Lameli
Technical Head
19.05.2021
Klaus Peter Weinper
Head of Quality
Department (QD)
Exemption from liability
The manufacturer and his representative
are not liable for any damage and lost profit
due to interruption in business caused
by the product or by an unusable product.
The manufacturer and his representative
are not liable for any damage which was
caused by improper use of the product or by
use of the product with products from other
manufacturers.
29