Flex LB 125 18.0-EC Notice D'instruction D'origine page 17

LBE 125 18.0-EC/LB 125 18.0-EC/L 125 18.0-EC-LD
Contents
Symbols used in this manual . . . . . . . . 17
Symbols on the power tool . . . . . . . . . . 17
For your safety . . . . . . . . . . . . . . . . . . . 17
Noise and vibration . . . . . . . . . . . . . . . . 21
Technical data . . . . . . . . . . . . . . . . . . . . 22
Overview . . . . . . . . . . . . . . . . . . . . . . . . 23
Instructions for use . . . . . . . . . . . . . . . . 24
Maintenance and care . . . . . . . . . . . . . . 27
Disposal information . . . . . . . . . . . . . . . 28
Declaration of Conformity . . . . . . . . 28
Declaration of Conformity . . . . . . . . 28
Exemption from liability . . . . . . . . . . . . . 29
Symbols used in this manual
WARNING!
Denotes impending danger. Non-
observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power
tool, read the operating manual!
Wear goggles!
Wear ear protection!
Disposal information for the old
machine (see page 28)
For your safety
WARNING!
Before using the angle grinder, please read
and follow:
these operating instructions,
–
the "General safety instructions" on the
–
handling of power tools in the enclosed
booklet (leaflet-no.: 315915),
the currently valid site rules and the
–
regulations for the prevention of
accidents.
This angle grinder is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The angle
grinder may be operated only if it is
as intended,
–
in perfect working order.
–
Faults which impair safety must be repaired
immediately.
Intended use
This angle grinder
– for commercial use in industry and trade,
– For dry grinding and cutting metal and
stone; a special protective hood is
required for cutting,
– for grinding surfaces, for derusting and
stripping paint when used with the elastic
sanding pad (only LBE 125 18.0-EC),
– for drilling in stone material with diamond
bits without using water,
– for use with grinding tool, wire brushes
and accessories recommended in these
instructions or by the manufacturer.
Not permissible are e.g. grinder chainsaw
discs, saw blades and (only L 125 18.0-EC LD)
diamond-coated grinding discs.
17