Atag MC 4211 L Mode D'emploi page 114

using your appliance
the memory function
The Memory function allows you to store 3 frequently used programmes which you
can then call up simply by pressing
wish, excluding the automatic programmes.
Programming the MEMORY function
To set:
Press ENTER to record Memory 1 (press
ENTER twice to programme M2, three
times for M3). Proceed as if setting your pro-
gramme for immediate use, ex. a 3 minute
microwave programme. Complete memory
programming by pressing ENTER (rather
than START) for one second . The memo-
rized programme (M1 / M2 / M3) flashes in
the display and a beep confirms that the per-
sonalized programme has been memorized.
To use:
Press ENTER, M1 appears in the display,
press again for M2, three times for M3.
The preprogrammed information (function,
time, ...) appears in the display, ex. Grill level
3 for 10 minutes.
Confirm your choice by pressing START, the
light switches on and the memorized pro-
gramme starts.
To modify:
Press ENTER to select M1, M2 or M3.
The preprogrammed information appears in
the display.
To modify the programming, press SELECT
instead of START.
Proceed as if for a new programme.
Complete memory programming by press-
ing ENTER (rather than START) for one sec-
ond .
The memorized programme (M1 / M2 / M3)
flashes in the display and a beep confirms
that the modified programme has been
memorized.
114
ENTER. You may memorize any programme you
Display