Revitive CIRCULATION BOOSTER 5575AQ Manuel De L'utilisateur page 11

Using the SoftTouch foot-pads
Usage tips d Adjusting the stimulation intensity
Tap the large green
intensity in single units to a comfortable level. The intensity level is indicated
by the coloured intensity level indicator on the arc and the large number inside
the arc.
To quickly decrease or increase the intensity, tap and hold
When using the foot-pads you will be guided to the right intensity by indications
and messages that appear on the screen. The intensity arc will also turn from
amber to green when sufficient rocking movement is achieved. This means that
you have reached a good stimulation level and are recording successful rocking
minutes. To achieve the best results you should aim to achieve the rocking
minutes target suggested in your therapy plan and by Rosie on the Home
Screen.
If at any point during your therapy session, you stop rocking, a sound/vibration
Pause will alert you. To start rocking again, increase the intensity level by tapping the
stimulation button
button.
Note: Very dry feet may cause Revitive to auto-pause, and stimulation will not
be possible until the soles of your feet are hydrated. If this happens, apply some
moisturiser to the soles of your feet.
When using the Electrode Pads use at an intensity that provides you with strong
but comfortable muscle contractions.
If you feel pain or discomfort: Lower the intensity of the foot/electrode pads
using the intensity controls on the session screen or the device.
e Pausing and resuming stimulation
Tap
When paused, the time display blinks in the app and on Revitive.
During a pause, you may reduce but not increase the intensity level.
Note that if paused for 10 minutes, the stimulation session ends and Revitive
powers off. You will hear three beeps when your Revitive switches off.
To resume your therapy session, place both feet back on the pads and tap
in the app to (or tap the button
You can tap
20
8035_IFU01_19037975_PRINT.indd 20-21 8035_IFU01_19037975_PRINT.indd 20-21
or buttons to manually decrease or increase the
or
remove your feet from the foot-pads.
on Revitive).
to stop the stimulation session.
.
f Adjusting the duration of your program
The duration of the scheduled program is set automatically. The remaining
stimulation time begins to count down in minutes as the program runs.
You can adjust the time at any point during a therapy session by tapping
the 'remaining time' indication to display the timer buttons.
Tap the grey or buttons to manually increase or decrease the
duration of your scheduled program.
g
At the end of the session, the app will ask if you would like Revitive to
remember the intensity level you reached for your next session using
the Auto Ramp-Up feature.
About Auto Ramp-Up: Enabling Auto Ramp-Up aims to simplify use of your
Revitive. When enabled Revitive will automatically increase the intensity level
to your preferred level when you tap the Start
manually increase the intensity.
h
The app will switch to the Home screen where you can view your
suggested Therapy Plan.
You can complete your suggested Therapy sessions whenever it suits you.
If you are unable to complete the session in one sitting you can stop and
start throughout the day. Revitive will track how many minutes you have
completed.
The device switches off after 10 minutes unless you revisit the Session
screen to start another program.
i
The Programs are automatically selected as part of your suggested Therapy
Plan. The program name is always displayed at the bottom of the session
screen.
You can manually choose your Program by tapping the Program name when
no stimulation is running.
EN
button. You will not need to
21
08/03/2023 15:41 08/03/2023 15:41