Fagor LAP-08 Manuel D'utilisation page 23

After selecting the cycle, the library cycle parameters can be consulted before including them in the
programme you are creating.
Each programme is a set of parameters grouped by cycles that are not linked to any of the cycles found
in the library.
•
Copy programme: Copy of a programme found in the library, giving it a new name.
•
Modify programme: Modification of the name of the programme and the cycles in the
programme. It is possible to add, modify, delete or change the order of existing cycles.
Just as when a new programme is created, when it is modified it is possible to add/delete cycles from
the cycle library.
When creating programmes, the cycle parameters can only be consulted. The cycles already in the
programme can only be modified when modifying the programmes.
•
Delete programme: Delete programmes stored in the library.
•
Import/export programme: This permits programmes to be imported/exported from an external
USB flash drive.
•
Import programme: Permits new programmes to be imported from a USB flash drive.
On opening the USB folder, only the files with ". prg" extension and the folders are displayed.
Translation of original instructions.
19