Fagor LAP-08 Manuel D'utilisation page 10

2 INTERFACE
All the washing machines have a touch screen displaying all the information and from where it is possible to
select all the controls shown on the screen.
When the machine is switched on, Screen Off is displayed. The ON/OFF button takes the user to the Main
screen, from where it is possible to run a programme or go to the main menu. Press START to go to the Run
screen, which displays all the relevant information about the screen.
Press ON/OFF to return to Screen Off from the current screen.
The information displayed on each of the screens can be omitted or enabled from the HUD menu (See section
4.2.1).
2.1 Screen OFF OPL
This screen is displayed when the washing machine is switched off, showing the parameters configured by the
user.
1. Machine identifier: Label identifying the machine (if enabled).
2. Laundrette message: Message configured by the user (if enabled).
3. Logo: The logo is displayed (if enabled).
4. Time: Time and minutes in the selected format.
5. Date: Date in the selected format (if enabled in HUD).
If the option "energy saving" is active, 10 minutes after switching off the washing machine, the screen
backlight will go off. If any part of the screen is touched, the backlight will light up again.
2.2 Main Screen OPL
The Main screen of the washing machine is as follows, and displays each of the available options. Some of
the options may be omitted from the HUD menu.
6