SilverCrest SDB 2400 B3 Mode D'emploi page 27

As soon as a suitable temperature is reached,
steam and boiling water will exit the holes in the
sole of the iron 0 . Any impurities that may be
present are flushed out .
6) As soon as no more water/steam is emitted
from the sole of the iron 0, let go of the
"Self-clean" button 8 . Iron over a towel or old
piece of cloth a few times to dry the sole of the
iron 0 thoroughly .
7) Press the TEMP 2 button repeatedly until
you hear a beep and the display 1 reads
"STdby" (Standby) in red letters .
8) Remove the power plug from the mains power
socket .
9) Allow the steam iron to cool down before
putting it away .
Housing
RISK OF ELECTROCUTION!
► Always remove the plug from the mains
power socket before cleaning the appliance .
► Never open the appliance housing! Otherwise
there is a risk of an electric shock .
WARNING – RISK OF INJURY!
► Allow the appliance to cool down before
cleaning it! Otherwise, there is a risk of
burns!
CAUTION – PROPERTY DAMAGE!
► Do not use solvents or abrasive clean-
ers . These will damage the surface of the
appliance!
► Do not use aggressive, chemical or abrasive
cleaning agents! They could irreparably
damage the surface!
■ Clean the housing with a soft, dry cloth only .
■ To clean the sole of the iron 0, wipe it with a
damp cloth and a small amount of dish soap .
■ 24 │ GB │ IE
All manuals and user guides at all-guides.com
Storage
■ Empty any remaining water from the water tank .
■ Store the cooled-down appliance in a clean,
dust-free and dry location .
Disposal
Never dispose of the appliance
in your normal domestic waste .
This product is subject to the
provisions of European Directive
2012/19/EU .
Dispose of the appliance via an approved disposal
company or your municipal waste facility . Please
comply with all applicable regulations . Please
contact your waste disposal centre if you are in any
doubt .
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled with abbrevia-
tions (a) and numbers (b) with the following
meanings: 1–7: Plastics, 20–22: Paper and
cardboard, 80–98: Composites .
The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling
plant .
SDB 2400 B3