SilverCrest SDB 2400 B3 Mode D'emploi page 26

■ As soon as you hold the steam iron horizontally,
steam will come out of the sole of the iron 0 .
■ If you set the steam regulator 9 to
the steam iron vertically, no steam will come out
of the sole of the iron 0 .
Ironing with steam blast
The steam blast function is especially suitable for
smoothing difficult-to-reach parts of a garment .
1) Raise the steam iron slightly .
2) Press the steam blast button 5 for a blast of
steam .
You can also use the steam blast function to smooth
hanging textiles .
 H old the iron vertically and press the
steam blast button 5 .
Pausing operation of the steam iron
CAUTION – RISK OF FIRE!
Never leave a hot steam iron unattended if it is
switched on or connected to the mains power
supply .
1) To switch off the steam iron, press and hold the
TEMP 3 button or the
until you hear a beep and the display 1 reads
"STdby" (Standby) in red letters .
Or:
2) Press the TEMP 2 button repeatedly until
you hear a beep and the display 1 reads
"STdby" (Standby) in red letters .
SDB 2400 B3
All manuals and user guides at all-guides.com
or hold
TEMP 2button
Switching the steam iron off
1) Remove the power plug from the mains power
socket .
2) Empty the water tank and clean the sole of the
iron 0 .
3) Place the cooled-down steam iron on the base 7 .
Anti-drip system
With conventional steam irons, water can drip
from the sole of the iron 0 if the set temperature
is too low . This steam iron, however, is equipped
with a special anti-drip system (
temperatures, the steam iron automatically switches
off the steam blast function . When this happens, a
"click" can be heard . Set a suitable temperature
level . As soon as this is reached, steam production
is resumed .
Cleaning
Self-cleaning function
1) Fill the water tank to the marking MAX .
2) Insert the plug into the mains power socket .
3) To switch on the iron and set the temperature,
press the TEMP
11/MAX appears on the display 1 .
4) Press and hold the "Self-clean" button 8 .
For safety reasons the "Self-clean" button 8
does not engage in this position, as this would
cause water to drip from the sole of the iron 0
continuously .
5) Hold the steam iron horizontally over a suitable
container .
) . At low
3 button repeatedly until
GB │ IE 23
│
■