Assa Abloy KESO Integra Notice D'installation Et De Montage page 51

Function check
Check that the KESO K-Service correctly shows the KESO Integra Door Controller
®
that is connected to the network. Then start the k-entry KESO management
software and check that the device icons are displayed and that communication
with the KESO Integra Door Controller functions properly.
After every adjustment of the device properties, programming is required, and
this is indicated by an icon. The KESO Integra Door Controller is programmed using
the k-entry ® KESO management software. Then check the LED indicator on the
KESO AccessPoint ET and test the functions using authorised data carriers.
51
EN