Publicité
Les langues disponibles
Les langues disponibles
Intended use
The KESO trade partner must attend the KESO Integra net training course in order
to gain certification for selling and commissioning the online components.
The KESO Integra Door Controller is intended for use in the k-entry
®
access control
system. The device is only suitable for installation and utilisation in accordance
with these instructions.
Only authorised KESO trade partners are permitted to carry out assembly and
installation work. The VDE and ESD regulations must be observed.
The electricity supply must always be switched off before any wiring work is
carried out.
The power consumption of the KESO Integra Door Controller plus the power
consumption of the connected locking components, such as electrical openers,
motorised cylinders, or motorised or switch locks, must never exceed the
nominal capacity of the connected mains adapter. Observe the relevant instruc-
tions provided with the connected components.
When determining the required capacity of the mains adapter, also take into
account its temperature range.
Any other type of use shall be regarded as contrary to the intended purpose.
Note!
37
EN
Publicité
