Publicité
Les langues disponibles
Les langues disponibles
Check the cabling
1
Before switching on the power supply, check the connections.
There must never be a direct connection from the mains supply
(115/230 volt) to any of the KESO Integra Door Controller connections.
The mains voltage must be connected to the mains adapter at 230V.
There must be no visible damaged insulation or exposed areas on the cables.
The protective cover must be installed before the system is set in operation.
Works relating to the mains supply (115/230 volt) may be carried out only by
authorised experts.
To ensure safe operation, the maximum permissible cable lengths and cable
specifications must be observed.
47
EN
Publicité
