Parkside PRDB 21 A1 Traduction Des Instructions D'origine page 10

GB MT
coupling nut (2).
3. Connect the adapter (1) to your
Parkside pressure washer via the
high-pressure connection by inserting,
pressing and turning (bayonet lock).
4. Fix the connection by tightening the
coupling nut (2).
Disconnecting:
Disconnection is done in reverse order.
Cleaning/maintenance
Perform the following cleaning work regu-
larly. This will guarantee long and reliable
use.
General cleaning work
Do not use any abrasive
cleaning agents or solvents.
These could damage the
plastics irreparably.
• Clean the pressure washer attachment
with a damp cloth as needed.
Maintenance
The pressure washer attachment is
maintenance free.
Storage
• Always store the product:
- dry.
- clean.
- out of the reach of children.
Disposal/environmental
protection
The product and packaging should be
properly recycled.
10
Take the product to a recycling plant.
The plastic and metal parts used on your
device can be properly sorted according
to materials and grades and efficiently
recycled. Please contact our service centre
for more information.
We will dispose of any defective devices
that you send to us free of charge.
Spare parts/Accessories
Spare parts and accessories can be
obtained at www.grizzlytools.shop
If you have issues ordering, please use the
contact form.
If you have any other questions, contact
the "Service-Center" (see page 10).
Service-Center
Service Great Britain
GB
Tel.: 0800 404 7657
E-Mail: grizzly@lidl.co.uk
IAN 440089_2304
Service Malta
MT
Tel.: 800 622 30
E-Mail: grizzly@lidl.com.mt
IAN 440089_2304
Importer
Please note that the following address is
not a service address. Please initially con-
tact the service centre specified above.
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
DE-63762 Großostheim
GERMANY
www.grizzlytools.de