Parkside PDSA 20-Li C2 Instructions D'utilisation Et Consignes De Sécurité page 43

3) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire .
4) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns .
5) Do not use a battery pack
for tool that is damaged or
modified. Damaged or modified batteries
exhibit unpredictable behaviour resulting in
fire, explosion or risk of injury .
6) Do not expose a battery pack
or tool to fire or excessive
temperature. Exposure to fire or
temperature above 130 °C may cause
explosion .
7) Follow all charging instruction and
do not charge the battery pack or
tool outside the temperature range
specified in the instruction. Charging
improperly or at temperatures outside the
specified range may damage the battery
and increase the risk of the fire .
Service
1) Have your power tool serviced
by a qualified repair person
using only identical replacement
parts. This will ensure that the safety of
the power tool is maintained .
2) Never service damaged battery
packs. Service of battery packs should
be only be performed by the manufactured
or authorized service providers .
40 GB/IE
˜ Sprayer safety warnings
The sprayer shall be used only
with water .
Keep the area clear of all
bystanders, children and pets
while spraying .
Risk of fire! Do not spray
flammable liquids such as
gasoline .
Risk of explosion! Do not place
in direct sunlight .
Only use the parts supplied or
approved by the manufacturer .
Do not spray into wind, water
or drinking water source .
Hold the spray lance away
from the operator .
Properly tighten the spray tank
cover after pouring liquids into
the spray tank .
Use only consumer‑grade
water‑based chemicals .
Do not use alkali self‑heating
or corrosive liquids with the
product . These can corrode
metal parts or weaken the tank
and hose .
Do not leave residue or spray
material in the spray tank after
using the product . Clean the
product after each use .