Tronic TCP 10 A1 Guide De Démarrage Rapide page 25

˜ Scope of delivery
1 Qi charging stand
®
1 USB charging cable
1 Short Manual
˜ Operation
ATTENTION! The product must not be charged
at a PC or notebook due to the high power
consumption.
NOTE:
The product only supports devices with Qi wireless
technology.
Charge your mobile device
1. Plug the USB type A plug of the USB charging cable
into the USB port on a suitable USB adapter and
plug the USB type C plug into USB type C input
socket of the product.
2. Plug the USB adapter into an easily accessible
mains socket.
3. LED indicator will light up blue for approx. two
seconds when the product is under standby mode
and there is no mobile device on the Qi charging
surface.
4. Place the mobile device on the Qi charging surface.
Make sure the center of the device is aligned over
the center of the Qi charging surface. Charging will
GB/IE
23