Wilo Helix EXCEL 22 Série Notice De Montage Et De Mise En Service page 47

Parametrization of <2.0.0.0> and <5.0.0.0> menu
In « SERVICE » mode, the menu parameters <2.0.0.0> and <5.0.0.0> can be modified.
Two setting modes exist:
• The « Easy Mode » : fast mode to get access to the 3 operating modes.
• The « Expert Mode » : mode to get access to all parameters.
• Put the switch 1 on ON position (Fig. A1, rep. 1).
• The « SERVICE » mode is activated.
This symbol blinks on the status page of the display (Fig. A9).
Fig. A9
SERVICE
ON
1 2 3 4
OPERATION
ON
1 2 3 4
Easy Mode
• Press the encoder during 2 secondes. The symbol « Easy Mode » appears (Fig. A9).
• Press the encoder to validate this choice. The display changes to menu number <2.0.0.0>.
The « Easy Mode » allows, quickly, the setting of the 3 operating modes (Fig. A10)
• Speed control »
• « Constant pressure »
• « P.I.D. control »
• After setting, put the switch 1 on OFF position (Fig. A1, item 1).
Expert Mode
• Press the encoder during 2 secondes. Go to the expert mode, the symbol « Expert Mode » appears
(Fig. 14).
• Press the encoder to validate this choice. The display changes to menu number <2.0.0.0>.
At first, select the operating mode in menu <2.0.0.0>.
• « Speed control »
• « Constant pressure »
• « P.I.D. control »
Then in menu <5.0.0.0>, the expert mode gives access to all the converter parameters (Fig. A11).
• After setting, put the switch 1 on OFF position (Fig. A1, item 1).
WILO SE 03/2013
EASY Mode
EXPERT Mode
ON
S
Control type
EASY Mode
Setting point
Control type
EXPERT Mode
Pump
Information
Service
English
47