ULTIMATE SPEED 2620 Traduction Du Mode D'emploi D'origine page 14

Do not disassemble or modify the car &
„
motorcycle battery charger. This device must
only be repaired by a maintenance technician.
Do not expose the device to any source of
„
heat.
CAUTION: How to avoid accidents and
injuries resulting from electric shock:
Electrical safety:
Do not carry the device by the cable. Do not
„
unplug the plug from the socket by pulling on
the cable. Protect the cable from heat, oil and
sharp edges.
If the cable is damaged, unplug the plug
„
immediately from the socket.
z Specific safety instructions
A slightly higher temperature during charging
„
is absolutely normal and not a malfunction.
Protect the car & motorcycle battery charger
„
from moisture and high temperatures,
1
including fires.
Store the car & motorcycle battery charger
„
in a dry place and protect the device from
1
moisture and corrosion.
Do not drop the car & motorcycle battery
„
charger
z Before use
„
Take all parts from the packaging and check whether the device or
parts show any damage. If this is the case, do not use the device.
Contact the manufacturer via the indicated service address.
Remove all protective films and other transport packaging. Check that
the delivery is complete.
„
Always remove the mains plug from the socket before you perform
any work on the car & motorcycle battery
„
Before connecting the charger please read the operating instructions
for the battery.
„
In addition, you must adhere to the instructions from the vehicle
manufacturer where a battery is continuously connected in the
vehicle. Secure the vehicle, switch the ignition off.
„
Clean the battery poles. Make sure that the dirt does not come into
contact with your eyes.
„
Make sure that there is sufficient ventilation.
14
GB/IE/NI/CY/MT
while it is being used.
1
charger.
1