ULTIMATE SPEED 2620 Traduction Du Mode D'emploi D'origine page 11

Put the battery onto a well-ventilated surface
„
when charging. Otherwise, the device can be
damaged.
EXPLOSION HAZARD!
„
Ensure that the positive pole connection cable
has no contact with a fuel line (e.g. petrol line)!
DANGER OF CAUSTIC BURNS!
„
Protect your eyes and skin from caustic burns
from the acid (sulphuric acid) when it comes
into contact with the battery!
Use acid-resistant safety goggles, clothing
„
and gloves! If your eyes or skin have come
into contact with the sulphuric acid, flush the
affected body region with plenty of clear,
running water and seek medical advice at
once!
Avoid electrical short circuits when connecting
„
the car & motorcycle battery charger to the
battery. Connect the negative pole connection
cable only to the negative pole of the battery
or the car body. Connect the positive pole
connection cable only to the positive pole of
the battery!
Before connecting to the mains, verify the
„
mains power has the required 230 V~ 50 Hz,
a 16 A fuse and an ELCB switch (earth leakage
circuit breaker)! Otherwise, the device can be
damaged.
Do not use the car & motorcycle battery
„
charger near any fires, heat and long-term
temperatures above 50 °C! For higher temper-
atures, the output power of the car & motorcycle
battery charger will drop automatically.
Only use the car & motorcycle battery charger
„
with the original parts it was delivered with!
Do not cover the car & motorcycle battery
„
charger with any objects! Otherwise, the
device can be damaged.
Protect the electrical contact surfaces of the
„
battery from short circuit!
Only use the car & motorcycle battery charger
„
for the charging and trickle charging of
GB/IE/NI/CY/MT 11