Cleanmaxx VC349 Mode D'emploi page 28

Les langues disponibles

5. If you need to clean the dust container, you have to remove the dust container lid

ﬁ rst by turning it conterclockwise and pulling it off. NOTE: Orientation marks for the

removal and placement of the lid are provided on the lid and dust container. You

can remove the lid when the ▼ mark on the lid is pointing towards the  mark on

the dust container. If necessary, thoroughly rinse the dust container with clear, luke-

warm water. CAUTION: Do not under any circumstances clean the dust contai-

ner in a washing machine or dishwasher! Then shake off any excess water and

allow the dust container to dry completely in the air.

6. When the dust container is completely dry, screw the dust container lid ﬁ rmly back

onto the dust container. NOTE: Orientation marks for the removal and placement of

the lid are provided on the lid and dust container. Place the lid on the dust container.

The ▼ mark on the lid has to point to the  mark on the dust container. Turn the lid

clockwise until the ▼ mark on the lid is pointing to the  mark on the dust container.

7. Place the dust container into the device: Hold it by the handle and place the bot-

tom of the container into the device ﬁ rst. Then push the handle against the device

housing until the dust container is heard to lock in place. Hold the device by the

handle and lift it to check that the dust container is in the correct position.

Cleaning the dust ﬁ lter and the plastic dust ﬁ lter

08925_DE-GB-FR-NL_V0.indb 28

All manuals and user guides at all-guides.com

1. Push the release button on the dust bin and pull it out of

the device by the handle.

2. The dust ﬁ lter is located in the dust container lid. Open the

dust container lid by releasing the catch on the handle

and ﬂ ipping up the lid.

3. Remove the dust ﬁ lter for cleaning. Tap out the contents

of the dust ﬁ lter over a dustbin and brush off the loose dirt.

Never clean the dust ﬁ lter with water!

26.05.2014 09:20:36

Z 08925