Cleanmaxx VC349 Mode D'emploi page 31

Problem Potential cause/solution/tips
•
•
The suction power
•
is weak.
•
The device •
emits dust when
vacuuming.
The power cord •
cannot be wound
up completely.
An unpleasant •
odour develops
when vacuuming.
Technical data
Model number:
Product number:
Voltage supply:
Output:
Safety class:
Disposal
The packaging material can be recycled. Dispose of the packaging in an
environmentally-friendly manner and make it available to the collection service
for recyclable materials.
Dispose of the device in an environmental-friendly manner. The device does
not belong in the household waste. Dispose of it at a recycling centre for old
electrical and electronic devices.
For more information, please contact the administration in your community.
Customer service/importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: +49 38851 314650 *)
*) Calls subject to a charge.
All rights reserved.
08925_DE-GB-FR-NL_V0.indb 31 08925_DE-GB-FR-NL_V0.indb 31
All manuals and user guides at all-guides.com
Is the auxiliary air valve on the handle open? Close it.
Is the dust bin too full? Empty the bin.
Are the fi lters very dirty? Clean them.
Is the nozzle, telescoping tube or suction hose plugged?
Turn the device off, pull the mains plug out of the socket and
remove the obstruction (also see chapter "Assembly").
Has the dust bin not been closed properly and/or is it not
(properly) inserted in the device? Correct this.
The cord has not been properly wound up in the device. Pull
it out somewhat and then push the button
the cord winder again.
Are you using the device for the fi rst time? An odour often
develops when using new devices for the fi rst time. The odour
should disappear once you have used the device a few times.
VC349
Z 8925
220 – 240 V~, 50/60 Hz
650 W
II
31
for engaging
26.05.2014 09:20:38 26.05.2014 09:20:38