LG LMU185HV Manuel D'utilisation page 28

How to Fix
Hanging bolt
(W3/8 or M10)
Nut
(W3/8 or M10)
Spring washer
(M10)
• The following parts are local purchasing.
Hanging Bolt - W 3/8 or M10
Nut - W 3/8 or M10
Spring Washer - M10
Plate Washer - M10
Wiring Connection
• Open the control box cover and connect the remote control cord and indoor power wires.
TQ/TR series
Conduit connection
• Remove the busing rubber product attached on the indoor unit.
• Join the conduit and the conduit bracket together using nut.
• Set the connecting cable into the terminal block of indoor unit, and tighten set screw to lock the
conduit bracket to the indoor unit.
Conduit bracket
Keep the length of the bolt
from the bracket to 40mm(1-1/2 inch)
Flat washer for M10
(accessory)
Ceiling board
Flat washer for M10
(accessory)
Nut
(W3/8 or M10)
Paper model
for installation
CAUTION : Tighten the nut and bolt to
prevent unit from falling off.
Terminal Block of Indoor Unit
1(L1) 2(L2) 3
Connected to outdoor unit
Connecting Cable
Screw
Conduit
Ceiling
Air Conditioner body
Ceiling board
Keep the length of 15~18mm(5/8~3/4 inch)
between the air conditioner bottom surface
and the ceiling surface
Set screw of
paper model (4 pieces)
Open the ceiling board
along the outer edge of the
paper model
4 5
TO AIR
FRESH
KIT
OPTION
Installation Manual 27
Installation