Télécharger Imprimer la page

Bosch MUMS6ZS34 Manuel D'utilisation page 40

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 50
en Basic operation
6.2 Performing initial start-up
When switching on the appliance for
the first time or after resetting to the
factory settings, the Welcome screen
will appear.
Insert mains plug.
1.
a The display shows the Bosch logo
and then switches to language se-
lection.
Press
or
2.
quired language and confirm with
⁠ .
Use
or
to select the required
3.
display units and confirm with
a The appliance is ready to use.
7 Basic operation
Ba s i c ope r a t i o n
Ba s i c ope r a t i o n
7.1 Preparing the appliance
Insert mains plug.
1.
→ Fig.
6
a The display shows the Bosch logo.
Press the release button and raise
2.
the swivel arm until it engages.
→ Fig.
7
Place the bowl in the main unit.
3.
→ Fig.
8
Use the recesses on the main unit.
Turn the bowl anticlockwise until it
4.
engages.
→ Fig.
9
Fit the lid onto the main drive until
5.
it engages.
→ Fig.
10
The filling shaft must face towards
the front.
Press the tool into the main drive
6.
until it engages.
11
→ Fig.
The protective cap 
the main drive completely.
40
to select the re-
must cover
Add the ingredients to the bowl.
7.
→ Fig.
Press the release button and push
8.
the swivel arm down until it en-
gages.
→ Fig.
7.2 Processing ingredients
with tools
Insert mains plug.
1.
Set the rotary switch to the re-
2.
quired speed.
→ Fig.
⁠ .
a The display shows the speed set
and the processing time.
a If the speed is changed, the pro-
cessing time will begin again at
0 seconds.
If wished, further ingredients can
3.
be added during processing using
the filling shaft.
→ Fig.
To add greater quantities, switch
off the appliance, open the swivel
arm and transfer the ingredients to
the bowl.
Process the ingredients until you
4.
achieve the required result.
Set the rotary switch to
5.
→ Fig.
Wait until the appliance stops.
7.3 Using instantaneous
switching
Set the rotary switch to
1.
hold.
→ Fig.
a The ingredients are processed at
maximum speed.
Release the rotary switch.
2.
→ Fig.
a The rotary switch springs to
a Processing stops.
12
13
14
15
16
17
18
⁠ .
and
⁠ .

Publicité

loading

Ce manuel est également adapté pour:

Mums6 serie6 serieMums6zs34/01Mums6zs34/02