Publicité
Les langues disponibles
Les langues disponibles
Display
Tip: You can find further information
here:
→ "Safety systems", Page 39
→ "Troubleshooting", Page 46
5.5 Signal tone
In case of a malfunction or if a safety
system switches off the appliance, a
signal tone is output.
Possible malfunctions included the
pivot arm not being correctly en-
gaged or the appliance overheating.
→ "Troubleshooting", Page 46
5.6 Touch display
The touch display functions both as a
display and a control element. The
touch display shows the options you
can choose from and the settings
configured for the current function.
Note: If the touch display is wet or
soiled, this can restrict functioning.
Touch buttons
Depending on the mode, different
touch buttons are shown in the bot-
tom third of the display.
Touch but-
ton
Status
¡ There is a fault
with the appli-
ance.
Function
Confirm selection
¡ Back or cancel
¡ Scroll left
Scroll right
¡ Increase values
¡ Scroll up
¡ Reduce values
¡ Scroll down
Set scales to 0 (tare)
Familiarising yourself with your appliance en
Main menu
You can use the main menu to ac-
cess the settings, functions and pro-
grammes.
To show the main menu and to leave
the current display, press
of the menu items is displayed.
Menu item
Setting
Timer
Scale
Sensor
Blender
Ice-cream
maker
Accessory
tips
5.7 Swivel arm and drives
Here you can find an overview of
uses depending on the position of
the swivel arm and drive.
If the release button is pressed, the
swivel arm can be moved to the re-
quired position.
3
→ Fig.
until one
Application
→ "Basic settings",
Page 41
→ "Timer", Page 42
→ "Scales",
Page 42
→ "Automatic pro-
grammes", Page 43
Display depending
on activated ac-
cessories
→ "Basic settings",
Page 41
Example: additional
programmes for the
blender attachment
or ice maker
Information on op-
timal use of the ap-
pliance, tools and
accessories
37
Publicité
