Bosch MUMS6ZS34 Manuel D'utilisation page 46

en Troubleshooting
15 Troubleshooting
Tr oubl e s hoot i n g
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Tr oubl e s hoot i n g
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist
staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
working.
Appliance does not
start processing.
The swivel arm cannot
be opened or closed
because the tool is
jammed in the bowl.
The beating whisk
touches the bowl or
the ingredients are not
mixed properly.
46
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
▶ Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶ Check the circuit breaker in the fuse box.
There has been a power cut.
▶ Check whether the lighting in your room or other
appliances are working.
Rotary switch is set incorrectly.
▶ Set the rotary switch to
Drive is not in the parked position.
Set the rotary switch to
1.
If the swivel arm doesn't close, remove the tool.
2.
Close the swivel arm until it is correctly engaged in
3.
the work position.
Set the rotary switch briefly to and then back to
4.
a The drive remains on for a short time until the
parked position is reached.
The distance to the bowl is not set correctly.
▶ Correct the fine adjustment of the beating whisk.
→ "Fine adjustment of beating whisk", Page 38
before processing.
⁠ .
⁠ .