SPIDO PC 300 Notice D'utilisation page 17

Golden rules for care
1) Check the filter of the pump (9) regularly, and clean it with clear
water if necessary.
2) When temperature is close to 0°C, empty the pump housing by
using the drainage cap (1), and protect the pump of the frost.
3) In case of long period of inactivity, store the pump in a dry, well
ventilated place, protected from frost
When disabling the pump
> Unplug the pump form the mains
> Unscrew the drainage cap (1) to empty the water in the pump
> Store the pump where it is protected from frost
Bring into service
> Follow the steps of the chapter "Getting started
Breakdown – detection and solutions
Pump does not start?
Have you checked...
 If pump is connected to the mains?
 If there is no current failure of the mains?
You might need to...
 Check the mains
Low flow?
Have you checked...
 If connectors of the suction part are perfectly airtight?
 If the filter of the pump is not obstructed?
You might need to...
 Repair connections and/or change the suction hose
 Clean up the filter of the pump.
"
6