SPIDO PC 300 Notice D'utilisation page 14

To be checked before you start
The pump is made for swimming pool equipment.
The pump has to be fixed on a plane and solid surface
The pump is made for clear water circulation, with a temperature below
35°C
This pump is only made for swimming pools and basins that comply with
IEC 60364-7-702 regulation, and the national regulations where the pump
is installed
Your pump PC 300
1. Drainage cap
2. Pump housing
3. Tightening wheels
4. Water input. Suction connector:
Ø 38 mm
5. Water output. Delivery
connector: Ø 38 mm
4
3
1
6. Electric box
7. Motor
8. Foot / Base
9. Filter
10. Cap of the filter
5
10
2
8
6
9
GB
7
3