Télécharger Imprimer la page

Frigelux CTT90BE Manuel D'utilisation page 25

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Door right-left change
Your freezer is built with a reversible door. You have the choice of either opening it from the
left or the right side. In order to reverse the opening direction of your door, please follow these
simple instructions.
Warning:
Before changing the opening side of the door, unplug the device from the mains.
Any removed part must be kept until the end of installation.
Do not lay the device down on the floor, you could damage the cooling system.
Get help from one or two more people.
1. Remove the upper hinge cover (1) and the
upper hinge (2)
2. Lift the door and remove the fixing screws
of the lower hinge (4)
3. Remove the hinge pin and bottom hinge
(4) by unscrewing the screws.
4. Remove the foot (5) from the left side and
go back to the right side
5. Reassemble the lower hinge (4) on the left
side of the appliance by refitting the
screws
6. Put the door (3) on the lower hinge (4) and
refit the upper hinge (2)
7. Make sure the door and the seals are installed correctly.
8. Refit the upper hinge cover (1)
4. USE INSTRUCTIONS
Temperature setting:
Your freezer has one control for regulating the temperature. The temperature control is located
at the top of the freezer.
The first time you put your appliance into operation, let it run empty for 4 hours before storing
food for it set the thermostat to "3" and let it run empty for 4 hours before storing food for it to
cool sufficiently.
24

Publicité

loading

Ce manuel est également adapté pour:

Ctt90bdsCtt90xds