Publicité
Les langues disponibles
Les langues disponibles
Page 7 of 15
•
Now, using a 5mm Allen tool, secure the tail bracket assembly to the mounting bracket (item
2) using the 2x included M8 countersunk bolts (item 8). Ensure the tail bracket wiring passes
along the wiring channel on the spanning block, emerging as shown in picture 13.
•
Using a 4mm Allen tool, secure the tail bracket assembly to the original swingarm mounting
bracket using the included 4x M6 x 16mm countersunk bolts (item 4), as shown in picture 14.
Ensure the wiring passes along the channel on the RHS of the swingarm mounting bracket, as
shown in picture 15.
•
Fit the included wiring adaptor (item 10) to the license plate light wiring, then refit the wiring
cover previously removed (see pictures 4 & 5).
•
Refit the assembly to the swingarm, securing with the 3x bolts previously removed (see
pictures 2 & 3). THESE MUST BE TIGHTENED TO THE MANUFACTURER SPECIFIED
TORQUE SETTINGS.
•
Reconnect all 3 wiring connectors (see picture 1). At this point, turn on the ignition and check
all lights function correctly, if lights fail to illuminate, check connections. Resecure the wiring as
original with the included cable ties (item 14).
•
Mount the licence plate (it may require drilling) to the rear of the bracket ensuring that it does
not cover the indicators.
•
IMPORTANT: IF FITTING A FULL-SIZE LICENCE PLATE AND PLACING IT FAR DOWN ON
THE LICENCE PLATE HANGER, THERE IS A SMALL CHANCE OF THE LICENCE PLATE
HITTING THE BACK WHEEL UNDER HEAVY LOAD AND OVER LARGE BUMPS IN THE
ROAD. IT IS YOUR RESPONSIBILITY TO CHECK FOR THIS POSSIBILITY AND TAKE
AVOIDING ACTION. FAILURE TO CHECK THIS COULD RESULT IN SERIOUS INJURY.
•
Depending on local laws, attach enclosed reflector (item 13) in an appropriate location.
•
Please test the indicators, rear light, and licence plate illuminator before riding.
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design
changes which do not diminish their performance or visual appeal and supplying them in such state shall conform to the order.
The Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply to the Products other
than those in R&G's order or confirmation and the Buyer confirms it has chosen the Products as being of merchantable quality
and suitable for its particular purposes. Where R&G fits the Products or undertakes other services it shall exercise reasonable
skill and care and rectify any fault free of charge unless the workmanship has been disturbed. The Buyer is responsible for
ensuring that the warranty on the motorcycle is not affected by the fitting of the Products. On return of any defective Products
R&G shall at its option either supply a replacement or refund the purchase money but shall not be liable if the Products have
been modified or used or maintained otherwise than in accordance with R&G's or manufacturer's instructions and good
engineering practice or if the defect arises from accident or neglect. Other than identified above and subject to R&G not limiting
its liability for causing death and personal injury, it shall not be liable for indirect or consequential loss and otherwise its liability
shall be limited to the amounts paid by the Buyer for the Products or the fitting or service concerned. These terms do not affect
the Buyer's statutory rights.
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if
they were purchased direct from us (customer must prove if necessary). Otherwise to be returned to original vendor. Goods
must be in re-sellable condition, in the opinion of R&G Racing. All returns are subject to a 25% restocking and handling fee (25%
of the gross value exc. P&P – at the prevailing price at time of purchase). The customer must pay any and all carriage charges.
No returns of discontinued products, unless within 14 days of purchase. This policy does not affect your statutory rights and does
not refer to faulty goods.
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
ISSUE 1 - 27/02/2021 (FB)
CONSUMER NOTICE
R&G RACING RETURNS POLICY (NON-FAULTY GOODS)
R&G Racing
www.rg-racing.com
Email:
LP0295BK
info@rg-racing.com
Publicité
