Projector Adressing; Technical Specifications; Power Supply; Lamp - Futurelight GENESIS Série Mode D'emploi

4.2 Projector addressing (for digital signals)
DIP switch settings
Each projector occupies 8 channels. To ensure that the control signals are properly directed to each
projector, the projector requires adressing. This is to be done for every single projector by changing the DIP
switches as set out in the table. The Test-switch starts the projector's self test. Use the Pan and Tilt switch in
order to invert these two movements.
5. Technical Specifications GENESIS

5.1 Power supply

GENESIS HMI 575:...... 230V / 50Hz
Power consumption: .... 750 W
Fuse: ............................ 10A (lamp)
Fuse: ............................ T800mA (electronics)

5.2 Lamp

GENESIS HMI 575
HMI 575W double-sided
-Lamp life: ..................750 hours
-Colour temperature:..5600°K

5.3 Optical system

- Double condensor lens with high efficiency parabolic mirror

5.4 Colours

- 7 interchangeable dichroic filters plus white
- 2 additional correction filters for additive colour mixture (3200°K and 5600°K)
- 24 colours plus 24 semicolour projections possible
- Integrated ultraviolet filter
- Colour wheel with variable rotation speed

5.5 Gobos

- Gobo wheel 1: 4 rotating gobos,3 static gobos plus full circle
- Gobo wheel 2: 2 gobos, 2 beam reducer, multi-colour-gobo, 2 exchangeable dichro-gobos
- Gobo rotation at variable speed in both directions
- Fixing of gobo position at 360° possible

5.6. Dimmer/Strobe

- Linear mechanical dimmer
- Dimmable from 0% - 100%
- Strobe effect with variable speed (1-6 flashlights per second)

5.7. Special effects

- 3 facets prisma
- Frost filter

5.8 Motor

- 8 high-quality stepper motors controlled by microprocessors
5.9 Electronics
- Digital serial input DMX 512
22