Installation; Installing Power Supply - Mettler Toledo SevenCompact S210 Mode D'emploi

3 Installation
Carefully unpack the meter. Keep the calibration certificate in a safe place.
3.1 Installing power supply
The instrument is supplied with an universal AC adapter. The AC adapter is suitable for all line voltages
in the range of 100 to 240 V, 50/60 Hz.
Attention
● Before operating, check cables for damage!
● Ensure the cables are tidily arranged so that they cannot be damaged or interfere with the installa­
tion!
●
Take care that the AC adapter does not come into contact with liquids!
●
The power plug must be accessible at all times!
1 Insert the correct connector plug into the AC adapter until it is completely inserted.
2 Connect the cable of the AC adapter with the DC socket of the instrument.
3 Plug the AC adapter into the wall socket.
To remove the connector plug, push the release button and withdraw the connector plug.
6

Installation