Bosch GWX 18V-15 P Professional Notice Originale page 35

To start the power tool, push the unlocking lever (10) for-
wards and then push the on/off switch (5) up.
To switch off the power tool, release the on/off switch (5).
Always check abrasive tools before using them. The
u
abrasive tool must be fitted properly and be able to
Status indicators
Battery charge indicator Meaning/cause
(user interface) (30)
Green Battery charged
Yellow Battery almost empty
Red Battery empty
Power tool status Meaning/cause
indicator (35)
Green Status OK
Yellow Critical temperature has been reached or re-
chargeable battery is almost empty
Illuminated red Power tool has overheated or battery is empty Allow the power tool to cool down, or replace
Flashing red Kickback shutdown, restart protection or im-
pact shutdown has been triggered
Flashing blue (GWX 18V-15 C / GWX 18V-15 SC /
GWX 18V-15 PSC)
Power tool is connected to a mobile device or
settings are being transferred
A) Bluetooth ® Low Energy Module GCY 42 not included with the product as standard
Temperature indicator (36) Meaning/cause
Yellow Critical temperature has been reached (mo-
tor, electronics, battery)
Red Power tool is overheated and will switch off
Smartphone symbol (34) Meaning/cause
– (GWX 18V-15 C / GWX 18V-15 SC / GWX 18V-15 PSC)
Further information can be found under the "Power tool status" display on a mobile device if it
is connected via Bluetooth® wireless technology.
A) Bluetooth ® Low Energy Module GCY 42 not included with the product as standard
Connectivity functions
(GWX 18V-15 C / GWX 18V-15 SC / GWX 18V-15 PSC)
In conjunction with the Bluetooth® Low Energy
module GCY 42 (not included with the product as stand-
ard), the following connectivity functions are available for
the power tool:
– Registration and personalisation
– Status check, output of warning messages
– General information and settings
– Management
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy Module GCY 42 (not
included with the product as standard).
Bosch Power Tools
move freely. Carry out a test run for at least one
minute with no load. Do not use abrasive tools that are
damaged, run untrue or vibrate during use. Damaged
abrasive tools can burst apart and cause injuries.
Solution
–
Replace or charge battery soon
Replace or charge battery
Solution
–
Run the power tool at no load and allow it to
cool down, or replace or charge the battery
soon
or charge the battery
Switch the power tool off and on again
–
A)
:
Solution
Run the power tool at no load and allow it to
cool down
Leave the power tool to cool down
The connection of the power tool with the app must be con-
firmed by pressing the speed preselection button (32) on
the user interface (4). The app requests this when connect-
ing.
Maintenance and Service
Maintenance and Cleaning
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
English | 35
A)
:
1 609 92A 8Z2 | (20.11.2023)