Publicité
Assembly instructions - Components
Inserting bayonet mount nozzles.
Depending on the job to be done, fi t one of the two nozzle types, by inserting it into
the lance extension.
• Align slots on wand connector with nozzle.
• Push in bayonet nozzle mount.
• Turn nozzle counter clockwise to lock into position.
• Use tightening collar on wand to fi rmly secure nozzle in place.
Operating instructions - Use of spray nozzles
Use of spray nozzles
The quick–connect nozzle extension allows you to switch between adjustable spray nozzle and rotational jet nozzle.
Adjusting spray nozzles
Turn nozzle collar counter clockwise for high
pressure setting. Ideal for cleaning tough dirt.
WARNING
ALWAYS turn off pressure washer before changing any
components or accessories.
Rotational jet nozzle
Rotational jet nozzle provides a very focused and aggressive stream of water that blasts the most diffi cult dirt
and stains from surfaces.
Tightening collar
Turn nozzle collar clockwise to return to fan spray
setting- ideal for pre-wetting and rising.
WARNING
High pressure setting on adjustable nozzle (narrow jet )
or rotational jet nozzle can damage surface being cleaned
when sprayed too close .
WARNING
Rotational jet nozzle should be used with caution. Begin
spraying at item or surface from a safe distance to ensure
jet does not damage surface.
11
Inserting nozzle
1
2
1
Removing nozzle
2
3
2
Publicité
