Télécharger Imprimer la page

MSG KL1400XT Manuel De L'opérateur page 10

Publicité

Assembly instructions - Components
Installing top carry handle
• Carry handle facilitates easy rolling when moving the pressure washer.
• Secure the handle with using 2 screws included in the box.
• Ensure the handle is fi rmly inserted into the pressure washer body (the front surfaces
should be aligned with screws holes ).
• Insert and tighten screws using cross slotted screwdriver - do not over tighten.
WARNING
• This handle is not to be used as a lifting handle.
Installing water entry inlet filter
• Insert filter (9) into 3/4 MGT water inlet hose fitting
(10) for water entry fitting.
Insert gasket (11)
Then screw in assembly firmly into water inlet fitting
Connecting high pressure hose to the spray gun
• Using 17 mm wrenches, secure the non-quick connector fi t end
of the high pressure hose with the threaded end of the spray gun.
• Firmly tighten and avoid cross threading.
Cleaning brush (soft bristle)
• Connect cleaning brush with spray gun.
• Secure brush by screwing into the spray gun - Only a
snug fi t is required. Do not over tighten.
• USE tightening collar on spray gun to fi rmly attach the
brush - Turn collar clockwise to ensure a proper tight fi t .
Detergent wand and bottle
• Connect detergent wand with spray gun.
• Secure wand by screwing into the spray gun - Only a
snug fi t is required. Do not over tighten.
• USE tightening collar on spray gun to fi rmly attach the
detergent wand - Turn collar clockwise to ensure a proper tight fit .
WARNING
• Use of chemical cleaners can cause bodily harm and/or property damage.
• NEVER use liquids that contain solvents, like petroleum distillates or acetone or products that are highly flammable,
explosive and toxic when nebulized.
• Use ONLY pressure washer safe detergents/soaps. Always carefully read and follow manufacturer labels and instructions.
Connecting spray gun to the wand
• Align threaded end of wand with quick connect screw coupler
on the spray gun.
• Simply hand tighten by twisting wand into end of spray gun.
• Use tightening collar on spray gun to fi rmly secure wand.
10
11
10
Tightening collar

Publicité

loading