Publicité
Les langues disponibles
Les langues disponibles
System settings
System PIN is 0000 on delivery.
1. Press Menu. Scroll to Base Settings. Press Select.
2. Scroll to desired function. Press Select.
3. Enter the desired setting. Press Select.
Delete HS
Warning: To de-register a handset: WARNING, A deregistered handset can not be used with the system.
Ring Setup
The base unit ringer can be adjusted. Only applies to Arc 9r.
Dial Mode
TONE/PULSE, must be set to tone in most countries.
Flash Time
RECALL TIME.
Long = New Zealand. Medium = France/Portugal Short= Other countries UK/Australia
Modify PIN
The code (e.g. 0000) can be changed.
First Ring
First ringer signal on/off. For SMS etc.
BS default
Resetting base unit.
Register a new handset
All handsets included in the package are already registered to the base unit.
Only for separate handsets/service measures.
You can register up to 6 handsets to one base unit.
This model is GAP (Generic Access Profile) compatible, which means that the handset and the base unit can both be used
with most other GAP compatible units irrespective of manufacturer. However the GAP protocol cannot guarantee that all
functions may be accessed. Extra handsets will not be available as accessories.
1. Hold down the
button on the base unit around 6 seconds.
J
2. Press Menu. Scroll to Registering. Press Select.
3. Scroll to required base unit (Blue=previous reg.). Press Ok.
4. Enter the base unit PIN code (e.g. 0000). Press Ok.
5. If the registration is successful the unit will return to standby mode within one minute.
Expanded system (+1)
The call number for internal calls will be shown in the display in standby mode. The base unit should be positioned
centrally so that the coverage area is roughly equal for all handsets.
Intercom
1. Press
.
I
2. When there are more than 2 handsets: Enter the call number
all handsets.
3. Press Select.
Transferring calls/Conference between handsets
1. An external call is connected.
2. Press
.
I
3. When there are more than 2 handsets: Enter the call number
all handsets.
4. Press Select.
5. To transfer: press
L
For conference: hold down
,
.
I
English
-
for the handset you wish to call or press
1
6
-
for the handset you wish to call or press
1
6
to call
9
to call
9
Publicité
