Doro Arc 7 Mode D'emploi page 11

Out of memory
In total the memory can hold up to 59 messages (including the outgoing message) or a maximum of 30 mins. When
flashes in handset or the base unit flashes FF, no new messages can be recorded until the old ones have been
played back and deleted. In that case, the answer machine responds with the outgoing message for Answer Only.
PLEASE NOTE! Remember to delete messages regularly!
Remote Access
The unit can be remotely accessed using an ordinary tone dialling telephone.
1. Call the answer machine.
2. Press when the outgoing message is played.
*
3. Enter the PIN code, see Answer Machine Settings. One beep confirms correct code.
4. Select a remote access command, see below.
5. Replace the handset.
Command Function
2.......................Erase single msg during playback
4.......................Skip to previous message
5.......................Playback of messages
6.......................Skip to next message
7.......................Start the answer machine
8.......................Stop
9.......................Turn off the answer machine
Remote activation
The answer machine can be activated via the remote access functions.
1. Call the answer machine. It will answer after approximately 10 rings.
2. Press
when the outgoing message is played.
*
3. Enter the PIN code, see Answer Machine Settings. One beep confirms correct code.
4. Press .
7
5. Replace the handset.
English