Incoming numbers/Caller ID
The display shows you who is calling and the 30 most recent missed calls. New Call(s) will be shown in
standby mode and in the list indicates a missed call. This function requires a subscription from your
service provider!
Retrieving and dialling
1. Press
. Scroll to desired position with
9
2. Press
to call or press Select followed by Menu for various options.
In order to remove the text
entry (marked with ) in the list or delete all calls.
Delete all calls
1. Press
.
9
2. Press Select followed by Menu.
3. Scroll to Delete All. Press Select.
4. Press Ok.
Caller identification messages
In addition to number display, the following messages will be shown occasionally:
Out Of Area
E.g. international call.
Withheld
Unlisted number. Number cannot be shown.
MSG indication for network operator's answer service
a
*Delete: Press
9
and then hold down
Clock/Alarm
1. Press Menu. Scroll to Clock/Alarm. Press Select.
2. Scroll to desired setting. Press Select.
Date & Time
Setting the date & time.
Alarm
An activated alarm clock is indicated by
be heard for 40 seconds. Deactivate permanently with Off or press any button/Snooze for repetition
after 5 mins (activate this setting when programming). The volume is determined by the set ringer level.
.
}
New Call(s)
, must each entry in the log be read individually by pressing
Ok
. Press
.
4
English
in standby mode. When the alarm goes off, an audio signal will
Select
at every new